Garmin 400C Dual Beam Fishfinder

Garmin 400C Dual Beam Fishfinder Features and Tips

The Garmin Fishfinder 400C is a great fishfinder for freshwater fishing. It can also be used for salt water, but an upgrade to a dual transducer separate frequency necessary. Thanks to its high resolution bright color of this fish finder Garmin screen helps you easily, even in bright sun fish. The screen has a backlight excursions and ease of use for night fishing possible.

Garmin Fishfinder 400C comes with a dual beam 80/200 kHz transducer that allows deep penetration up to 900 meters. (Note that the disorder or covered water can reach the exact depth the fish finder to decrease.) This sensor is best suited for freshwater fish because of its depth of penetration.

The dual beam transducer provides a 45 degree cone fixed to 80 kHz and a cone angle of 14 degrees of adjustment of 200 kHz. This function allows you to see a large area with less depth and will help you get hard to see in the area of ​​fish in the depths.

If fishing saltwater in your future, you may want to switch to a separate dual frequency transducer. The cone angle pi and dual frequency model 1500 penetrate 45 degrees and 10 degrees, depending on the configuration. As in the dual beam transducer, you will see a variety of bottoms, but with this conversion, it is possible, hard to find, see the fish come up to 1500 meters deep.

If you are in freshwater or saltwater fish, Garmin Fish Finder can be a great tool for you.

Remember, however, that this model comes with a dual beam transducer, but you can buy a dual frequency transducer, as you wish.

Fish Finder Advice

There are some things to keep in mind to keep the fish finder screen during cleaning. First, you should make a habit, Fish Finder screen clean after each fishing trip. This good practice, and the following tips to keep in good condition longer.

When cleaning the box (with the exception of the screen) with a damp cloth and mild detergent. Then dry. Do not use cleaners or chemical solvents that can damage plastic parts. To clean the screen, use an eyeglass cleaner and a dry cloth. The reason for using this type of cleaning, because the screen is anti-reflective coating typically has a diameter. ammonia based cleaners, grease, alcohol, or abrasive cleaners to keep glasses clean siding which specifies that harmful use of anti-glare surfaces.

Most fish finders are also waterproof and resistant to it. Briefly under water (see the instructions for your model manual to be sure). Note, however, that the immersion for a specified period (usually 30 minutes) of time can lead to irreparable damage to the device. If submerged fish finder, dry with a clean cloth and let it dry completely before the next fishing trip.

I thought you might be interested in this article: Gear Hooks and Improve Your Fishing Odds

Fishing Rod

5 Reasons Why You Need a New Fishing Rod

If you are a fishing enthusiast, then you already know how to take advantage of multiple fishing rods

1 Different types of fishing require different types of reeds. We fish for trout and salmon fishing in the sea, and for those who want to take more big fish dedicated fishing rods. Maybe your style of fishing has changed. Maybe you moved and now the sea or river that are closer. His former fishing equipment can now not be the most suitable or appropriate for the new type of fishing.

2 rivers, lakes and streams all present different terrains and different species of fish. With the right kind of fishing for the right conditions, will provide and give you a better chance of catching more fish. If you fish the river, you can stand on the river for a long time trying to catch fish. With a beam of light can make a difference. Maybe you want to sit on the shore all day, then heavy barrel would be more appropriate.


3 If you fish all year round, you may prefer another run at different times of the year. You may need a rental auction, or can be used for the child. Some people like to have a longer rod for fishing in deep water, as it is easier to control. This is especially important when you consider that you can be in the water for several hours.

4 Perhaps you just want to deal with new technologies and advances in technology boom. Many recent advances in technology, fishing rod, fishing and other areas. Maybe you have a lot of fish and a lot of use of their fishing equipment. Do you really need new equipment and a new fishing rod is at the top of the list.

5 When you are too weak, and a fisherman fished for centuries, maybe a new fishing equipment that will inspire. Maybe you've just started fishing, and used an old friend a gun until you have decided that you need to buy your own fishing equipment. Maybe you are old fishing gear stored in the back of the garage for years and spent his best.

You have several fishing rods sense. With the right equipment is likely to get more and better the situation right. You are bound to lose enthusiasm when the plant is old and has seen better days. Why not see what it has to offer compared to your local store?

I thought you might be interested in this article: Garmin 400C Dual Beam Fishfinder and Gear Hooks

Garmin 140 Fishfinder

Garmin 140 Fishfinder and GPS Combo Review

The combination of black and white display LCD with unique genius Garmin Fishfinder 140 Garmin Fishfinder and GPS combo offers the user the perfect solution when space is an issue, for example;

The transducer wide and narrow scan beam duel with standard provides better performance unit with a particularly useful feature dual scan Garmin 140 Fish Finder delivered when used in shallow water. Sensor installation is very simple and can be in a number of places, including in the fuselage, tail or even a motor trolling, but must be installed on it to ensure that, in the ruins are the water level during design, so that air bubbles do not affect the information.

Both the transducer beam wide and narrow beams can give a unit treatability duel most used and transmitted by the sonar beam width and depth of the water in which regulates the use. The tight beam can be selected useful while working in deep water and gives clear displays when at its maximum width would be an area of ​​a circle of two meters, to a depth of about 30 meters, for example, the beam close.

Optimal use of the function of the beam width Garmin 140 is while fishing in shallow waters such as the user to take pictures of the whole boat particularly near the surface. While working at a depth of thirty meters, a beam would Braod an area of ​​approximately 20 meters to cover a circle and also displays crisp images of objects in the water near the surface.


The user very clear images of this around and under the boat, the Garmin 140 Fish Finder also displays background images.

The display is enhanced by a backlight for night fishing, and can be adjusted manually to adjust or completely stop conditions, to extend the battery life.

The Garmin 140 also offers the ability to save the settings after shutdown gives the user the ability to be able to find a favorite fishing spot.

Function ultra refreshing scrolling allows the speed of lightning, accurate data is updated. Change settings automatically or manually profit, is another feature that allows the user to control the sharpness of the pictures shown.

I thought you might be interested in this article: Fishing Rod and Garmin 400C Dual Beam Fishfinder